|
Loctite Dexter One Part Heat Cure
Eclectic One Part Room Temp Cure
Araldite® (Formerly Ciba) One Part Heat Cure
Eclectic Industrial
Adhesives
The strongest One Component Adhesives Available
E6000®
Self- Leveling Formula
E6100™ Non-Sag Formula
E6800™ UV-Resistant Formula
E-6000® Self-Leveling Formula
E6000® provides adhesion strength and versatilty not found in Silicones and rubber
cements.
Its strength in adhesing metals, glass, rubber and plastics and it's
self-leveling feature makes it
useful as a potting material in electrical and computer
applications.
E6000® Industrial Adhesives adhere to more
surfaces
with greater strength than other adhesives.
E6100™ Non-Sag Formula
 | Use wherever nails won't work
|
| Sets and seals aluminum window frames,
Counter tops.
|
| Automotive phone and antenna installations.
|
| Secure metal hinges or fixtures to wood |
E6100™, with all the strength and adhesive properties of E6000®, is the non-sag
formulation
that won't slump or run, allowing for maximum control. This adhesive is ideal
for overhead and
vertical use and wherever nails won't work.
E6100™ Industrial Adhesives adhere to more
surfaces
with greater strength than other adhesives.
E6800™ UV-Resistant Formula
 Marine
and Outdoor Use
May be applied as a contact adhesive; when cured,
it may be used below the waterline.
Seal around portholes
Seal wooden deck seams
Adhere fiberglass to wood or metal.
Clear UV-6800™ maintains all the superior properties of E6000® and enhances it with UV
stabilizers, which provide ultra-violet resistance for marine and outdoor applications.
It
may be used as an adhesive on fiberglass, concrete, metal, glass and wood including teak.
It is an excellent insulator against water, corrosion from salt spray, mildew, bacteria,
most
chemicals and vibration.
UV-6800™ maintains its adhesive strength, even when submerged under
water.
Dexter One Part Heat Cure
Adhesives
EA9432NA...is
an aluminum filled heat curing one - part modified epoxy adhesive. This adhesive is
formulated to provide excellent tensile shear strength and a high degree of impact
resistance.
FEATURES:
Excellent Tensile Shear Strength
Smooth Pumpable Flow
Room Temperature Storage
Thixotropic, Slump Resistant, Non-Sag |
Impact and Fatigue Resistant
One Component Adhesive
No Mixing
Tolerant of Poorly Prepared Substrates |
Call 1-800-323-5158 and ask for the Glu Guru™ for more
information
or Contact
help@on-hand.com
Araldite(Formerly Ciba)
One Component Heat Cure
Araldite® AV 118 Epoxy with
good peel strength, heat resistance and chemical resistance.
Araldite® AV119 Thixotropic,
gap-filling epoxy with good heat and chemical resistance.
Araldite® AV 3131 Thixotropic,
flexible adhesive that cures rapidly at normal bake temperatures.
XMH 8551 Resin
One-component epoxy that cures very quickly at normal bake temperature
| 
The Glu
Guru™
Adhesive Tech Center
